Best Of The Best Tips About How To Fix Feather Edge Boarding

Deffo miss the board behind with the nail.

How to fix feather edge boarding. Ie 3 nails on a 6ft board. The first feather edge board can then be fixed on the outside of your fence. See how to put up your own feather edge fence (also know as close board), great advice and an excellent visual guide.

Do not nail through 2. I nail 150mm pressure treated feather edge cladding using galvanised 50mm large head clout nails. Might be easier and more cost effective to purchase a.

Next, attach the first feather edge board to the exterior of your fence. Nail the featheredge boards in place, first nail in place the 1st two boards at either end, both facing inwards (narrow edge facing inwards). Fix the boards to the rails.

A practical guide to erecting a featherboard fence 5 board with around a 1 overlap so each boards covering around 100mm. Air dried cladding should be installed with 2 fixings spaced towards each edge.

Challenge fencing products installed b. Now nail the rest of the boards, use the above. Each subsequent board can then be fixed to the one below.

The first feather edge board can then be fixed on the outside of your fence. First picture is the way to do it, so that each board is held with a nail at the thick edge, and trapped by the thick edge of the next board at the thin edge. Use a spirit level to make sure this is absolutely upright.